Biker Bar transports bikes without straps, chocks, bolt-ons

HUMBOLDT, Kan. - B&W Trailer Hitches new Biker Bar mounts motorcycles to trailers without the need for straps, chocks and bolt-ons, according to the company. 

"Biker Bar is a totally unique concept and a complete departure from the cumbersome straps, chocks and bolt-on systems that can be ineffective, unsightly and cause damage to paint, chrome and leather finishes," the company says.

“Nylon straps are awkward, take up space, must be constantly re-tightened, and can easily cause abrasive damage to a bike,” said Travis McCall, new product engineer for B&W Trailer Hitches. “Wheel chocks help, but they still rely on straps to hold the bike in alignment, and when wheel travel and tension factors combine, suspension failure and other damage can often result.”

McCall noted that there are also products that require brackets to be permanently bolted to a bike’s frame, but that these affect aesthetics, reduce clearance height, and require two people to practically operate. “Biker Bar is a complete, engineered system that uses the bike’s frame and suspension system to create an extremely rigid and stable mounting solution that takes one rider about 30 seconds to engage or disengage," he added.

Watch a video of the product HERE
 
Biker Bar only touches the bike frame at the time of mounting and comes off immediately following dismounting, according to the company. "With Biker Bar, no tools are needed, because a hand-operated, neoprene-lined, quick-tension and quick-release clamping bar is applied to the frame just before loading. A single person can apply the clamping bar and roll the bike into the self-locking, trailer-mounted plate in about 30 seconds. A foot-operated release disengages Biker Bar and dismounting and removing the clamping bar is equally as quick and effortless as mounting," the company said in a press release.
 
"The physics behind Biker Bar are intelligent, protecting the motorcycles’ suspension system by incorporating it into the mounting equation. The rider sits on the bike, slightly compressing the suspension system as he or she guides Biker Bar into the mounting plate’s receiving mechanism, which automatically latches. When the rider dismounts, the suspension system remains compressed, exerting just the right amount of upward pressure to maintain rigid stability without stressing the suspension components. By repurposing the bike’s suspension system to create a firm vehicle stance, a bike secured with a Biker Bar becomes an extension of the trailer’s suspension system, instead of amplifying it as an active bike suspension system would," the company noted.
 
“Traveling with my bikes used to be a crapshoot, because they would shift no matter how hard I’d ratchet and tie them down,” said Bill Grotto of West Palm Beach, Fla., and Biker Bar user quoted in the company's press release. “With Biker Bar, I never have to worry about surprises when I open up the trailer door, and my bikes arrive unharmed every time.”
 
For bikers who use their trailers for multiple purposes, the Biker Bar receiving mechanism and base can be easily removed from the trailer floor. Two bolts secure the mechanism base to the floor and installation, and removal takes about 30 seconds, according to the company.
 
Biker Bar is available in four models that accommodate most Harley-Davidson motorcycles. A complete Biker Bar model chart can be accessed on the product website: www.DitchTheStraps.com. Biker Bar can be purchased online and through dealers; a dealer locator is available at: http://www.turnoverball.com/find-a-dealer

Press release posted by Mary Slepicka. Press image courtesy B&W Trailer Hitches